La Marzocco Strada X Commercial Espresso Machine (2 Group)
Product details
| Management number | 253392430 | Release Date | 2026/10/24 | List Price | CA$15,639.00 | Model Number | 253392430 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The Strada X is the most capable espresso machine La Marzocco builds, and the reason is under each group: a magnetic-drive gear pump variable from 0 to 12 bar. Pressure is a controlled variable throughout the shot, and each group can run its own curve at the same time. Everything else on the machine exists to make that control repeatable.
Pressure profiling, properly implemented
- A gear pump per group, plus a rotary vane supply pump: the rotary pump holds stable line pressure for Smart Saturation and steam boiler fill; the gear pumps execute the profiles. Two baristas can run entirely different pressure curves simultaneously with no interaction between them.
- Smart Saturation: the machine senses backpressure in the grouphead and automates pre-infusion accordingly, holding low pressure until the puck is genuinely saturated. This is where most channelling starts, and it is the part most machines leave to a timer.
- Mass-Based Profiling: ties the pressure profile to a target beverage weight through a predictive mass algorithm, so a saved profile stays repeatable rather than drifting with dose or grind.
- Three working modes: Manual to build a curve live on the paddle, Profile to save and repeat curves, and AV to set a custom pressure with a target weight and let it run. The Strada X is simultaneously the most manual and the most automated machine in the range, depending on which mode you are in.
- Independent 1.3 L saturated brew boiler per group with PID quoted at ±0.1 °F, plus an 8.2 L steam boiler at 3000 W.
- Drip-tray scales accurate to ±0.5 g with Drip Prediction, paired directly to the profiles, plus Brew Ratio mode.
- Per-group graphical displays, Pro Touch cool-to-touch steam wands, auto steam flush and an expanded drip tray.
Straight-In or Standard portafilter
Both are the same machine with different group hardware. Straight-In portafilters push in axially with an automatic locking system, and removing one triggers an automatic purge with hot water and an auto-clean with steam after a two-second delay — less wrist strain, less puck damage and faster turnaround between shots. Standard uses a conventional bayonet with a manual rinse lever. Scales, profiling and Brew Ratio are unaffected by the choice.
Best suited to
Competition bars and roastery flagships, multi-roaster programmes where every coffee gets its own curve, training academies, and any specialty operation for which extraction control is the entire proposition.
The Standard Portafilter configuration is supplied to special order. Requires a dedicated 30 A circuit. Certified UL-197, NSF-8 and CAN/CSA-C22.2 No. 109.
Bestseller ranking
Commercial Semi Automatic Espresso Machine
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form