SSP 80mm Burrs to fit Ditting 804/807, Mahlkonig Peak and E80
Product details
| Management number | 253652615 | Release Date | 2026/10/24 | List Price | CA$190.80 | Model Number | 253652615 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
SSP's 80mm burrs in the screw-hole mount, for the Ditting 804 and 807 and the Mahlkonig Peak and E80, which all share the same burr platform. Choose the burr and coating above. Each one is a straight swap for the factory burrs, no shims.
Which burr
- High Uniformity (HU): SSP's espresso-first cut. A tight particle spread with enough fines for body, so it pulls proper espresso and still grinds well for filter. Red Speed or Silver Knight.
- Cast Lab Sweet (LS): SSP's re-cut of the old Ditting 804 cast burr. Owners who have run both side by side report an easier dial-in and a wider sweet spot than the genuine Ditting Lab Sweets, with a different but not lesser cup. Sweet and balanced, and it handles espresso and filter from the one set. Red Speed or Silver Knight.
- SKD11 (uncoated): SKD-11 tool steel with 60 teeth on the top burr and 65 on the bottom, cut for grinding speed. Uncoated, so it costs less than the coated sets and wears faster: figure on roughly 1,000 to 2,000kg of coffee where a coated set runs to about 5,000kg.
Red Speed (TiAlCN) is the usual pick for espresso and keeps a controlled amount of fines, so shots carry a bit more body. Silver Knight (DLC type) makes slightly fewer fines and leans cleaner. Both are rated for roughly 4,000 to 5,000kg.
Compatibility
Screw-hole mount, the Ditting 804 and 807 platform that Mahlkonig also uses on the Peak and E80.
- Ditting KR804
- Ditting KR807
- Mahlkonig Peak
- Mahlkonig E80S and E80 GbW
Read this before you order for anything else. SSP cuts 80mm burrs in several mounting formats and they do not swap between grinders. Weber EG-1, Zerno Z2 and Option-O Lagom P80 owners need our SSP 80mm Blind Burrs, which use SSP's blind 3-pin mount. The Mahlkonig Tanzania and Ditting 805 take a different 2-pin blind burr. Bunn G-series grinders need SSP's Bunn version with its adapters. Talk to us first and we will order the right format for your grinder.
Features
- 80mm flat burrs, screw-hole mount
- Tool steel, made by SSP in South Korea
- High Uniformity and Cast Lab Sweet in Red Speed or Silver Knight, or uncoated SKD11
- Expect the cup to settle over the first 5 to 10kg
What's in the box
- 1 x Set of SSP 80mm burrs (upper and lower) in the burr and coating you choose
About SSP
Family owned and operated since 1991, SSP Grinding Solutions is a South Korean maker of precision grinding tools and custom burr sets.
See the full range in our SSP Burrs collection.
Bestseller ranking
Barista Supplies
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form